PRODUCT INFORMATION
Trade Name or Synonyms: MarSolve
Formula: Proprietary,
confidentiality required
Chemical Family: Water
scale Solvent
This revised reportcomplies with MSDS and is in accordance with 29 CFR
1910.1200-1500 Hazardous
Communication Act effective 25 November 1985 including Subpart Z. Furthermore,this
report complies with all
current WHMIS and Canadian Governmental Regulations.
PHYSICAL DATA
Boiling Point: 101C
Solubility in Water: Miscible
Specific Gravity, (Water = 1): 1.045
Vapor Pressure: 30Torr.
Vapor Density (Air = 1): Greater
than 1
Percent Volatile by Volume: 99.6%
Appearance: Dark liquid
Odor: Characteristic
Evaporation Rate (Water = 1): Slow
Physical State: Liquid
REACTIVITY DATA
Stability: Stable
Incompatibilities (materials to avoid): Strongcaustics
Hazardous decomposition products: None
Hazardous polymerization: Will
not occur
Conditions to avoid: Excessive
heating
HAZARDOUS INGREDIENTS
Material or component: Hydrogen
Chloride, Aqueous
TLV (p.p.m.): 5
Approximate %: Less
than 10
Note: Material is aqueous organic saltsolution and as such should NOT be considered hazardous under normal use conditions.
Note: Laboratory tests indicate material
to be BIODEGRADABLE. USDA approved for use in beverage,
pharmaceutical, bottling, poultry and other food processing plants. USFDA
has no jurisdiction over this product,
since it never comes in direct contact with food.
SPECIAL HANDLING
INFORMATION
Ventilation: 1.Local
exhaust: normal
2.Mechanical
(general): sufficient
3.Respiratory
protection (type): None required
Protective gloves: Recommended
Eye protection: Recommended
Other protective equipment: As
recommended by plant safety department aprons should be
worn
to prevent clothing from staining.
SPILL AND DISPOSAL PROCEDURES
Action to take for spills: Rinse
with copious amounts of water to dilute; Sodium
bicarbonate
may also be used to soak up and neutralize liquid
Disposal Method: Expended
or used material may be disposed of down sewer system
with
water flush. Material is BIODEGRADABLE - even as received.
SPECIAL PRECAUTIONS
Handling and storing: Preserve
integrity of container
Can material be stored outside?: Yes.
Maintain temperature between 10-180 F
Is material freezable?: Yes.
Other precautions: Do
not circulate material for more than four hour period without
consulting
the manufacturer. Most MarSolve cleaning can
be
accomplished
in an average of two hours. Please use material
only
as directed. Do not heat. Use MarSolve at
an ambient
temperature.Do
not pressurize circulating solution or elevate
temperatureabove
180° F.
HEALTH HAZARD DATA
Threshold limit value: None
for total - material is an aqueous organic salt solution and
as
such has little vapor pressure and no noxious fumes.
Effects of overexposure: Should
not be considered hazardous when used as directed.
Emergency and first aid procedures: If
eye/skin contact, copious water rinse. Consult physician. Not
to
be taken internally. If ingested - do not induce vomiting - drink
milk,
egg whites, etc. As directed by physician.
FIRE AND EXPLOSION HAZARD DATA
Flash point: No
flash point, extinguishes flame.
Extinguishing media: Does
not support combustion.
Special fire fighting procedures: None
- water will control, as will CO2 and dry chemicals.
Unusual fire and explosion hazards: Non-combustible
or explosive. Breathing apparatus recommended.
Health: 0
Flammability: 0
Reactivity: 0
Personal protection: B
For additional information, please review MarSolve specifications.
This data is furnished independent
of any sales of the product only for your investigation and independent
verification. While information is believed to be correct, MarSolve International,
LLC, shall in no event be responsible for any damage whatsoever, directly
or indirectly, resulting from the publication or use of or reliance upon
data contained herein. No warranty, either expressed or implied, of merchantability,
of fitness, or of any nature with respect to the product, or to the data,
is made herein.
Back to MarSolve Home Page