SPECIFICATIONS

• MarSolve is a non-toxic, non-corrosive, non-flammable, non-injurious tar oil base solvent,
  heavily fortified with wetting and penetrating agents used for the rapid removal of water scale,
  lime and rust deposits found on the water side of any equipment that is water cooled, water
  heated or water operated, in any manner.
  
  
• The solution is non-toxic, non-corrosive, non-flammable and non-injurious to any personnel
  when used as directed at any temperature within operating limits (Not to exceed 180 F/ 82 C).
  
  
• The solution is non-toxic, non-corrosive, non-flammable and non-injurious to any metal found
  in water systems. (See paragraph 4)
  
  
• The exceptions to paragraph 3 are aluminum, magnesium and some alloys of stainless steel.
  These metals will oxidize and, with a few exceptions, discolor. They are therefore not
  recommended for use with concentrated MarSolve solutions.
  
  
• The solution has the ability to dissolve approximately two pounds (1 Kilo) of calcium
  carbonate scale per U.S. gallon while at 70 F/ 21 C and in concentrated form.
  
  
• The solution is of pleasant odor and does not exude any obnoxious or unpleasant vapors
  when dissolving water scale, lime and rust deposits.
  
  
• The solution has a Specific Gravity of 1.045.
  
  
• The solution has a vaporization temperature of 213 F/ 100 C.
  
  
• The solution does NOT have an Open or Closed Cup Flash Point.
  
  
• MarSolve is an electrolyte, as are most cleaning agents. An electrolyte is any liquid that
  will transfer small electrical currents. Examples: Salt Water, Vinegar and Coca Cola.
  An electrolyte may cause plating in some types of equipment. This means a transfer of
  small amounts of one metal onto another metal. In some instances a thin coating of copper
  may be plated onto a steel drum while circulating an electrolyte such as MarSolve.
  The only time plating occurs is when two different metals are in an electrolytic solution.
  Some alloys of stainless steel are known to discolor and react galvanically in concentrated
  MarSolve solutions. To minimize this, use a diluted MarSolve solution.
  
  
• The solution has the properties to be mailed or shipped by any private or commercial
  carrier without restrictions. MarSolve may be shipped same day by air carriers for
  emergency deliveries.
  
  
• The solution does not corrode, erode, attack, pit, oxidize or have other deleterious affects
  on metals or materials:
  COPPER, CHROME, FIBER, LEATHER, LEAD, IRON, RUBBER, STEEL or other materials or
  metals found in boilers, pipes, valves, pumps, strainers, radiators, convectors, unit heaters,
  heat exchangers, engines, evaporators, turbines, condensers and/or other water heated,
  water cooled or water operated equipment when used as directed.
  
  
• The solution has the ability to dissolve deposits from some equipment while in operation
  and without shutdown, if auxiliary coolers are incorporated.
  
  
• The solution has the ability and effectiveness to be used at room temperature
  (50 F/10 C - 75 F/24 C) with full results obtainable.
  
  
• It is recommended the MarSolve be diluted 50% or more when cleaning chrome as some
  chrome will discolor.
  
  
• The solution does not develop a substantial increase in temperature while dissolving water
  scale, lime and rust deposits.
  
  
• It is recommended that MarSolve solution be thoroughly mixed in drum before using.
  
  
• The concentrated solution can be held safely, in the open hand, without deleterious affects.
  
  
• The solution does not freeze, slush or thicken at any temperature above 0 F/-18 C.
  
  
• The solution is not recommended for use at temperatures exceeding 180 F/82 C.
  
  
• The solution does not deteriorate, oxidize, saponify, thicken or lose effectiveness for at
  least five years.
  
  
• The solution does not require neutralizers as it is free rinsing with water.
  
  
• The foregoing specifications are applicable to our product, MarSolve, when used
  according to instructions available upon request and in NO WAY are intended to cover
  other uses or applications by the purchaser.
  
  
• Do not circulate materials for more than a four hour period without consulting the
  manufacturer. Most MarSolve cleansings can be accomplished in an average of two hours.
  Please use material only as directed.
  
  
• The solution is packaged and shipped in single gallon, 4 gallon cartons, 5 gallon jugs, 30,
  55, and 330 gallon non-returnable drums.
  
  
  
  The solution is biodegradable with a BOD value of 16 mg/liter. This allows for expended
  solution to be disposed of through regular sewers.
  
  USDA has approved MarSolve for use in plants under their jurisdiction.

Back to MarSolve Home Page                        

This data is furnished independent of any sales of the product only for your investigation and independent verification. While information is believed to be correct, MarSolve International, LLC, shall in no event be responsible for any damage whatsoever, directly or indirectly, resulting from the publication or use of or reliance upon data contained herein. No warranty, either expressed or implied, of merchantability, of fitness, or of any nature with respect to the product, or to the data, is made herein.